Diagnosing the causes of dampness (GR 5 revised)
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
Diagnosing the causes of dampness (GR 5 revised) was written by John Houston and published by BRE on 18 March 2015.
Even in a ‘dry’ building, there is a surprising amount of water in porous materials, most of which does no harm. A building is only considered to be 'damp' if the moisture or its effects become visible, leading to deterioration in decorations or the fabric of the building.
Dampness is the most common problem in housing. It results in visible wetting of walls, ceilings and floors, blistering paint, bulging plaster, sulfate attack on brickwork and mould growth on surfaces and fabrics, usually accompanied by a musty smell. It can also lead to less obvious problems such as a reduction in the effectiveness of thermal insulation or cracks in brickwork due to the corrosion of embedded metal components.
The first step in solving damp-related problem is to diagnose the cause.
This Good Repair Guide provides advice on how to identify the potential causes of dampness in homes. It is aimed at housing professionals, home owners and occupiers, and replaces guidance published in 1997.
Its contents are:
- Introduction.
- Internal dampness: moisture from condensation.
- External dampness: rain penetration.
- External dampness: rising damp.
- Construction moisture.
- Leaking pipes.
- Leaking roofs.
- Spillage.
- Ground and surface water.
- Contaminating salts.
- Hidden dampness.
- Specialist inspection.
- References.
Other guides in the series, Good Repair Guides 6–8, cover specific remedial treatment for the principal causes of dampness.
[edit] Related articles on Designing Buildings Wiki
- Assessing moisture in porous building materials.
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BRE Buzz.
- BREEAM.
- Building damp-free cavity walls.
- Building Research Establishment.
- Condensation.
- Damp in buildings.
- Damp proof membrane.
- Damp proofing.
- Damp-proof course.
- Dew point.
- Dry rot fungus.
- Efflorescence.
- Humidity.
- Interstitial condensation.
- Penetrating damp.
- Rising damp in walls - diagnosis and treatment (DG 245).
- Rising damp.
- Spalling.
- Understanding dampness.
- Wall insulation and moisture risk.
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.